Untitled Document
     
   
 
   
 
 
Untitled Document
 
  Carvin  
  Peavey  
  Ahuja  
  B-52  
  Jarguar  
    Indian Strings Instruments
    Guitars
   
VHF Wireless PA Microphones CWM-400V
SKU :

Features:

  • CWM-400V consists of a high band VHF wireless receiver and 4 nos. wireless table-top gooseneck microphones. The gooseneck microphones can be kept on a podium, or spread out across a conference table, some distance away from the Receiver. Wireless link between the gooseneck microphones and the Receiver allows fast and easy installation, and immense flexibility in shifting the position of the microphones as per requirement.
  • It is ideal for conferences and assemblies, as well as for a variety of announcement & other PA applications.
  • Up to 8 microphones of different frequencies can be used (with 2 Receivers).
  • A backup facility exists of connecting the microphones directly to an amplifier with suitable additional cables in case wireless operation is not desired under some circumstances.
  • The CWM-400V system is elegantly designed, with a slim 4 Channel Receiver and compact, lightweight microphones. The system is designed for rugged, professional use, and is optimally tailored for very clear, intelligible sound.
  • Compact and elegant high band VHF wireless microphone system with four gooseneck microphones.
  • Microphones available in 8 different frequencies (2 sets of 4 each).
  • Microphones are unidirectional condenser types, fitted with gooseneck, ON/OFF switch and an indicator LED.
  • Sleek table-top receiver which can receive signals from upto 4 microphones.
  • Individual output volume control and a RF LED for each channel provided on the front panel of the receiver.
  • Separate 6.3mm phone jack for audio output from each channel available on the rear panel.
  • Microphone operates with 2×1.5V AAA alkaline cells.
  • Receiver operates on12V DC through an AC adaptor, supplied along with.

 

 
General PA Series AUD-98XLR
SKU :

Features:

  • High output Neodymium cartridge. Excellent intelligibility & wide frequency response. Attractive appearance.
  • Supplied with quick detachable holder with 3-pin professional XLR connector & 6 mtrs. shielded low noise cable.
  • Unidirectional Dynamic
  • PA Applications
 
AUD-59XLR
SKU :

Features:

  • Attractive appearance, low cost PA microphone.
  • Supplied with 4.5 mtrs. shielded cable with 3-pin XLR connector and quick detachable holder.
 
Tie-Clip ATP-20M
SKU :

Features:

  • Subminiature omnidirectional electret condenser lavalier type microphone with wide angle pick-up.
  • Provided with a tiny fixed tie-clip. A compact cell container with On/Off switch accomodates a button cell. The cable length is 6.0 mtrs.
  • Ideal for lectures, interviews, religious places, recordings etc.
 
Paging Microphones ACM-66/ACM-66CH
SKU :

Features:

  • High quality, heavy duty paging microphone available with or without chime function.
  • Strong, robust and stable base incorporates separate push swithces for momentary and locked use.
  • The microphone can be used free standing or wall mounted.
  • Strong flexible 10” gooseneck is securely fixed to the aluminium die-cast base.
  • Model ACM-66CH comes with a multi tone electronic chime and operates on 2×1.5V (UM-3) pencil cells. LED indication and long battery life. Facility to set desired chime sound level.
  • Ideal for use in Paging applications and for open conferencing.
 
Gooseneck Microphones GM-605
SKU :

Features:

  • GM-605 professional high quality gooseneck microphone are suitable for various PA applications such as on Lecterns and Podiums, Open Conferences etc.
  • The sleek and slender design makes the microphone unobtrusive.
  • GM-605 is shorter.
  • Wide frequency response.
  • High front-to-back rejection for more gain before feedback.
  • Built-in XLR socket.
 
Microphone Base GMB-6C
SKU :

Features:

  • GMB-6C is a sturdy, heavy duty base made of die-cast aluminium suitable for Ahuja electret condenser gooseneck microphones. It has a female XLR connector for directly mounting the gooseneck microphone and a male XLR socket at the rear for connecting standard microphone cable to the amplifier.
  • Heavy weight housing with anti-skid feet ensures stability.
  • 10 mtrs. shielded 2-core mic cable with XLR connector & ¼” phone plug.
  • Built-in cell housing for 2×UM-3 pencil cells (3V) for operating the condenser microphone.
  • On/Off switch provided. Special electronic circuitry for minimal switch noise.
 
 
Untitled Document
 
Untitled Document
 
   
 
 
Untitled Document